 |
Common question - Configuration
|
 |
 |
To setup a GSM modem, first you have to attach it to your PC. The
next step is to find out which serial port (COM Port) is your
GSM modem attached to. After you have this information install
the GSM modem service provider connection.
(Click here to read about GSM modem installation for SMS messaging...)
|
 |
 |
Topic: GSM Modem
|
 |
Callcenter developers
If you are working on telephone solutions, please check
out the Ozeki VoIP SIP SDK.
It can be used to create: |
Webphone solutions:
- Adobe Flash video phone
- Silverlight video phone
- Web to web calls
- Web to VoIP calls
Custom SIP clients:
- Silverlight SIP VoIP client
- Flash SIP VoIP client
- C# .net SIP VoIP client
- ASP .net SIP VoIP client
- Web based SIP VoIP client
Custom VoIP solutions:
- VoIP SIP softphones
- VoIP call center clients
- VoIP IVR systems
- VoIP predictive dialer systems
- VoIP auto dialer systems
- VoIP call assistant
- VoIP call recording systems
- VoIP intercom solutions
|
Power supply options
When you order a Wavecom or Sierra modem from us, you should tell us which
adapter you need. You can select the adapter that connects your modem to
the PC power supply and you can select the adapter that connects you modem to
the standard 220V wall socket.
Option "A" - PC power supply
You can connect your Wavecom modem directly to the PC power supply. You can take
a look at the adapter cable on Figure 1.
Figure 1 - PC power supply adpater cable
Option "B" - Wall socket
You can connect your Wavecom modem to the standard 220V wall socket with
the adapter shown on Figure 2.
Figure 2 - Wall socket adapter
Next page:
Sierra Wireless Fastrack
|
