Callcenter developers
If you are working on telephone solutions, please check
out the Ozeki VoIP SIP SDK.
It can be used to create: |
Webphone solutions:
- Adobe Flash video phone
- Silverlight video phone
- Web to web calls
- Web to VoIP calls
Custom SIP clients:
- Silverlight SIP VoIP client
- Flash SIP VoIP client
- C# .net SIP VoIP client
- ASP .net SIP VoIP client
- Web based SIP VoIP client
Custom VoIP solutions:
- VoIP SIP softphones
- VoIP call center clients
- VoIP IVR systems
- VoIP predictive dialer systems
- VoIP auto dialer systems
- VoIP call assistant
- VoIP call recording systems
- VoIP intercom solutions
|
SNMP information query from Linux
In this section you can find information on how to query SNMP values
using the Linux snmpget and snmpwalk commands. These commands come
as part of the net-snmp package in most Linux distributions. To
query information you need to supply an OID value to these commands.
A list of Ozeki SNMP OIDs can be found in the
Ozeki SNMP Management Information
Database (MIB).
To install the SNMP library for your linux distribution, please issue
the following command:
yum install net-snmp net-snmp-utils
After the SNMP library has been installed you can use snmpget to query
information from your Windows machine. For example to get the
uptime of the Windows computer that has an IP address of 192.168.90.193
you should issue the following command:
snmpget -v 1 -c public -O v 192.168.90.193 1.3.6.1.2.1.1.3.0
In this command you can see the value "1.3.6.1.2.1.1.3.0". This is the OID
of the uptime. To get information about Ozeki NG you should use an OID specified
in the Ozeki MIB. For example the
OID .1.3.6.1.4.1.33355.1.1.1 would give you the version number of the
installed Ozeki NG SMS Gateway. To query this information, please issue the
following command:
snmpget -v 1 -c public -O v 192.168.90.193 .1.3.6.1.4.1.33355.1.1.1
Of course you have to replace the IP address (192.168.90.193) to the IP address
of the computer that you want to query (this computer should have Ozeki NG SMS
Gateway
and the Ozeki SMS SNMP extension
installed).
To get all the values that are provided by Ozeki NG, you should initiate an SNMP
walk request with the root OID of Ozeki. The command to achieve this goal would
be:
snmpwalk -v 1 -c public 192.168.90.193 .1.3.6.1.4.1.33355
Dig deeper!
People who read this also read...
Next page:
Migration/Hardware Replacement
|
