If you are working on telephone solutions, please check
out the Ozeki VoIP SIP SDK.|
It can be used to create VoIP client and server software.
Failover cluster with one live Ozeki NG SMS Gateway Node
If you wish to protect your service against hardware failure and reach higher
availability of your Ozeki NG SMS Gateway software, we recommend you to try
our Ozeki Cluster software product.
Ozeki Cluster automatically moves any
service to another computer in case of a hardware failure. You can
download it from the following website:
In a failover cluster setup only one of the Ozeki NG SMS Gateway nodes operate at a time.
We destinguish the primary node (System "1") and the backup node (System "2").
The primary node serves all the clients at any give time, the backup node serves none.
The primary node is connected to all the sms service providers, the backup node is not
connected to any provider.
During normal operation the primary node is "On-line" the backup node is "Off-line".
In this setup the primary and the backup node usually share a common storage facility,
called shared disk or quorum disk. This shared storage option allows the two
system to be synchronized.
In case the primary node goes down because of a hardware failure, the backup node
is automatically activated. It picks up the configuration and the message queues from
the shared disk, and continues to provide the service where the primar node left off.
Please note, that this configuration requires persistent message queues.
The failure detection and the switchover can be achieved by setting up the Microsoft Failover Cluster
solution for Ozeki NG SMS Gateway.
The benefits of this configuration over the Live cluster setup 1 and
Live cluster setup 2 lies in its simplicity. The configuration
is easy, because only the primary node needs to be configured. The shared storage facility provides
a way for the two nodes to share the configuration.
This setup is very popular among our clients.
People who read this also read...
Load Balancing for SMPP v3.3