Ozeki NG SMS Gateway logo OZEKI NG SMS Gateway
"The World's most reliable SMS gateway software!"
info@ozekisms.com
Tel.: 00 36 52 532 731
SMS Gateway to send SMS via GSM modem or IP SMS connection Overview SMS Gateway to send SMS via GSM modem or IP SMS connection SMS Gateway to send SMS via GSM modem or IP SMS connection Quick start SMS Gateway to send SMS via GSM modem or IP SMS connection SMS Gateway to send SMS via GSM modem or IP SMS connection Download SMS Gateway to send SMS via GSM modem or IP SMS connection SMS Gateway to send SMS via GSM modem or IP SMS connection Manual SMS Gateway to send SMS via GSM modem or IP SMS connection SMS Gateway to send SMS via GSM modem or IP SMS connection How to buy SMS Gateway to send SMS via GSM modem or IP SMS connection SMS Gateway to send SMS via GSM modem or IP SMS connection FAQ SMS Gateway to send SMS via GSM modem or IP SMS connection SMS Gateway to send SMS via GSM modem or IP SMS connection Contact Us SMS Gateway to send SMS via GSM modem or IP SMS connection
OZEKI NG SMS Gateway - Product Guide

Failover clustering<br />(Windows Server 2012 R2) Contents | SearchNagios setup

Home > Product Manual > User Guide > Administrator's guide > SNMP

SMS Gateway SMS Gateway Home

  Product Manual
  Introduction
  SMS technology
  Installation Guide
  User Guide
  Quick Start Guide
  User Interface
  Configuration
  Client software
  Administrator's guide
  Cluster
  Load Balancing for SMPP v3.3
  Troubleshooting
  Backup
  Manual uninstallation
  Manual upgrade
  Performance
  Increasing the availability
running two Ozeki NG

  High volume SMS messaging
  Recommended computer
  Bandwidth
  Manual installation
  Failover clustering
(Windows Server 2003)

  Failover clustering
(Windows Server 2012 R2)

  SNMP
  Nagios setup
  MIB
  Linux
  Migration/Hardware Replacement
  Message priorities
  Message queues
  SMPP via VPN
  Developers Guide
  Examples and Solutions
  Appendix
  FAQ
  Feature list
  Commercial Information
  Search
  Cookie policy
 


Automated phone calls?
Ozeki Phone System XE VoIP PBX software is an advanced PBX built for automated voice calls and 2 way SMS messaging. It has outstanding APIs for software developers. It can be used for:

Phone calls from SQL
Phone calls from HTTP
Voice and SMS applications

Callcenter developers
If you are working on telephone solutions, please check out the Ozeki VoIP SIP SDK.
It can be used to create VoIP client and server software.

Contact Us!
If you wish to get further information, do not hesitate to contact us!

E-mail: info@ozekisms.com

If you have a technical question, please submit a support request on-line.

SNMP with Ozeki NG SMS Gateway

(Requires Ozeki NG SMS Gateway v4.2.9 or newer release)


In this guide, you can find information on how to setup SNMP monitoring for Ozeki NG SMS Gateway. The SNMP monitoring feature of Ozeki NG makes it possible for you to query information about your Ozeki NG SMS Gateway installation through the SNMP protocol. For example it makes it possible for you to find out if an SMS Service Provider connection (IP SMS or modem connection) is on-line or not. You can also monitor which users have large message queues. Please note, that this feature is only available in Ozeki NG SMS Gateway 4.2.9 or above.

The guide gives you step-by-step instructions on how to setup SNMP support in Ozeki NG SMS Gateway. These steps are useful if you want to integrate Ozeki NG into your corporate network management system.

Prerequisites

If you work with SNMP you probably use some kind of a network management software. For example you can use Nagios, HP Openview, Novell NMS, IBM NetView or Sun Net Manager. If you don't have a network management software available, you can make simple SNMP requests with an SNMP utility. For example most linux distributions provide a command called snmpget and snmpwalk, and for windows, you may download a simple SNMP client, such as the SNMP eye tool.

How does it work?

Ozeki NG has a built-in SNMP Monitoring Agent which provides SNMP monitoring service to you clients. When your network management software send an SNMP get request to the Ozeki NG SMS Gateway OID, the request will be forwarded to the Ozeki SNMP Monitoring Agent, that will get the data from Ozeki NG (Figure 1).


Figure 1 - SNMP Get request

How to use it?

At first, you need to enable the SNMP Monitoring Agent in Ozeki NG in the SNMP tab in the Server Preferences menu (Figure 2) - you need to check the Enable SNMP Monitoring Agent checkbox to start the SNMP Monitoring Agent.


Figure 2 - SNMP Monitoring Agent

There are two paramteres of the SNMP Monitoring Agent you can configure. The first is the UDP port the SNMP Monitoring Agent will use to listen to SNMP requests - you can set this port number in the SNMP listening port (UDP) field.
In the Community name field, you can enter the community name that is used to identify the SNMP community which Ozeki NG belongs to.

After you have configured everything properly, you can start sending SNMP GET requests to the Ozeki SNMP Monitoring Agent. The above mentioned SNMP eye tool is good to try sending some SNMP requests to the Monitoring Agent. You just need to enter the IP Address of the Agent (e.g. the IP Address of the machine running Ozeki NG SMS Gateway), the proper community name (ozekimonitoring in this case), and at least one appropriate OID (Figure 3). Note, that OIDs must start with a dot ("."). The OIDs you can use can be found on the page MIB.


Figure 3 - SNMP Eye Tool

After sending the SNMP GET request to the SNMP Monitoring Agent in Ozeki NG SMS Gateway, it sends back the information requested (Figure 4).


Figure 4 - SNMP Eye Tool - response

Dig deeper!
People who read this also read...





Next page: Nagios setup
Copyright © 2000 - 2017 Ozeki Informatics Ltd.
All rights reserved

Software PBX for Windows | VoIP SDK   |   Legal information   |   Privacy policy   |   Terms of use
Please, address your inquiries to info@ozekisms.com