Ozeki NG SMS Gateway logo OZEKI NG SMS Gateway
"The World's most reliable SMS gateway software!"
info@ozekisms.com
Tel.: +36 1 371 0150
SMS Gateway to send SMS via GSM modem or IP SMS connection Overview SMS Gateway to send SMS via GSM modem or IP SMS connection SMS Gateway to send SMS via GSM modem or IP SMS connection Quick start SMS Gateway to send SMS via GSM modem or IP SMS connection SMS Gateway to send SMS via GSM modem or IP SMS connection Download SMS Gateway to send SMS via GSM modem or IP SMS connection SMS Gateway to send SMS via GSM modem or IP SMS connection Manual SMS Gateway to send SMS via GSM modem or IP SMS connection SMS Gateway to send SMS via GSM modem or IP SMS connection How to buy SMS Gateway to send SMS via GSM modem or IP SMS connection SMS Gateway to send SMS via GSM modem or IP SMS connection FAQ SMS Gateway to send SMS via GSM modem or IP SMS connection SMS Gateway to send SMS via GSM modem or IP SMS connection Contact Us SMS Gateway to send SMS via GSM modem or IP SMS connection
OZEKI NG SMS Gateway - Product Guide

Bandwidth Contents | SearchFailover clustering<br />(Windows Server 2003)

Home > Product Manual > User Guide > Administrator's guide > Manual installation

SMS Gateway SMS Gateway Home

  Product Manual
  Introduction
  SMS technology
  Installation Guide
  User Guide
  Quick Start Guide
  User Interface
  Configuration
  Client software
  Administrator's guide
  Cluster
  Load Balancing for SMPP v3.3
  Troubleshooting
  Backup
  Manual uninstallation
  Manual upgrade
  Performance
  Increasing the availability
running two Ozeki NG

  High volume SMS messaging
  Recommended computer
  Bandwidth
  Manual installation
  Failover clustering
(Windows Server 2003)

  Failover clustering
(Windows Server 2012 R2)

  SNMP
  Migration/Hardware Replacement
  Message priorities
  Message queues
  SMPP via VPN
  Developers Guide
  Examples and Solutions
  Appendix
  FAQ
  Feature list
  Commercial Information
  Search
  Cookie policy
 


Automated phone calls?
Ozeki Phone System XE VoIP PBX software is an advanced PBX built for automated voice calls and 2 way SMS messaging. It has outstanding APIs for software developers. It can be used for:

Phone calls from SQL
Phone calls from HTTP
Voice and SMS applications

Callcenter developers
If you are working on telephone solutions, please check out the Ozeki VoIP SIP SDK.
It can be used to create VoIP client and server software.

Contact Us!
If you wish to get further information, do not hesitate to contact us!

E-mail: info@ozekisms.com

If you have a technical question, please submit a support request on-line.

Restore / manual installation

Recommended reading:
If you wish to protect your service against hardware failure and reach higher availability of your Ozeki NG SMS Gateway software, we recommend you to try our Ozeki Cluster software product. Ozeki Cluster automatically moves any service to another computer in case of a hardware failure. You can download it from the following website: http://www.ozeki.hu/cluster

This guide gives you information on how to restore Ozeki NG SMS Gateway from a backup. It is assumed, that you have backed up your installation by saving a copy of the Ozeki NG SMS Gateway directory. The information provided can also be used to install the software manually.

Introduction

The installation of Ozeki NG SMS Gateway without the installer requires two steps. The first step is to copy the files to the destination directory, the second step is to register the service.

Step 1.) Copy the files to your file system

We recommend to use the "C:\Program Files\Ozeki\OzekiNG - SMS Gateway" directory. After you have copied the directory, you should see OzekiNG.exe and InsSrv.exe along with some other files, plus some subdirectories, such as config, users, etc. will be present (Figure 1).


Figure 1 - Unzip to a directory

Step 2.) Register the system service using InsSrv.exe

The Ozeki NG SMS Gateway directory contains a small tool called InsSrv.exe. This tool can be used to register or unregister the Ozeki NG SMS Gateway service in your system. To register the service, you should issue the following command:

cd "C:\Program Files\Ozeki\OzekiNG - SMS Gateway>"

C:\Program Files\Ozeki\OzekiNG - SMS Gateway>InsSrv.exe install "OzekiNG"
"Ozeki NG SMS Gateway" "C:\Program Files\Ozeki\OzekiNG - SMS Gateway\OzekiNG.exe" ""

Note that the first parameter is "install", the second parameter is the short name of the service, the third parameter is the nice name of the service the third parameter is the full path pointing to the exe file, that will run in the background. The fourth parameter is empty. This command can be executed using the Windows command line utility. To start the windows command line utility, select Run in the start menu and enter cmd.exe (Figure 2).


Figure 2 - Register the service using InsSrv.exe

Step 3.) Start the service

Once the service has been registered, you will find it in the Service management form of the Windows Control Panel. You can bring up this form quickly by typing services.msc on the command line (Figure 3).


Figure 3.) Service properties

On the service management form, you can open the properties of the Ozeki NG SMS Gateway service using the right mouse button. On the service properties form, you can click on "Start" to start the service (Figure 4).


Figure 4.) Start the service

Once the service has been started, you can access it from Internet Explorer or Mozilla Firefox, by typing in the following URL: http://127.0.0.1:9501

Additional information (to install a second copy)

Video tutorial: How to install a second copy of Ozeki NG to the same server

If you wish to install a second copy of the service to the same system, you need to copy the files to a different directory and you need to modify the 2nd and 3rd parameters in the InsSrv.exe command to provide a unique name for the service. Of course you should change the 4th parameter as well to point to the exe file in the new directory. You also have to change the port numbers in the config.txt file, that can be found in the config directory. In the config.txt file, please change the following parameters:

HTTPSGUI 9643
Listen 9600
ListenAPI 9602
ListenGUI 9601

After these parameters have been changed, you can access the second copy of the service using the http://127.0.0.1:9601 URL.

Dig deeper!
People who read this also read...





Next page: (Windows_Server_2003)>Failover clustering
(Windows Server 2003)

Copyright © 2000 - 2017 Ozeki Informatics Ltd.
All rights reserved

Software PBX for Windows | VoIP SDK   |   Legal information   |   Privacy policy   |   Terms of use
Please, address your inquiries to info@ozekisms.com